Home

QOV Mystery 10                 Clue #4

Cutting Instructions:

DARK BLUE:..............(24)  3 7/8" squares

LIGHT BLUE:...............(6) 7 1/4" squares

GOLD:....(4) 2 1/2" x 10 1/2"

             (4) 2 1/2" x 12 1/2"

Sew (2) 4-Patch units together, then sew (1) White/Red strip                       Next, sew (1) 4-patch, (1) Quick Corner unit from previous clue,

unit on end, as shown.                                                                            and (1) "X" unit as shown:

Make 2

Make 2

Sew (1) Red/White strip unit, (1) "Y" unit, & (1) 2 1/2" BW-HST unit together, being careful of rotation and placement of units.

Make 2

Join rows as shown below:

Make 2 LABEL "U"

Using same method as above, make a similar block - NOTICE THE ROTATION OF 4-PATCHES & Red/White unit.

Make 2

LABEL "W"

---->

Sew (1) 2 1/2" x 10 1/2" GOLD strip to the side of above "U"                 Sew (1) 2 1/2" x 10 1/2" GOLD strip to side of "W" block, and

and (1) 2 1/2" x 12 1/2" GOLD strip to the top, as shown:                       (1) 2 1/2" x 12 1/2" GOLD strip to top, as shown:

Make 2

Make 2

Join above 4 blocks, rotating blocks as shown:

Make 1

---->

---->

This ends Clue #4

Cutting Instructions for Clue #5

   RED:.....(24)  3 1/2" squares

   DK BLUE:....(2)  3 1/2" squares

  WHITE:....(2)  3 1/2" squares

Make Flying Geese units by placing (2) 3 7/8" DARK BLUE squares on (1) 7 1/4" LIGHT BLUE square, right sides together

(squares will overlap slightly).  Draw a diagonal line from top left corner to bottom right.  Stitch a scant 1/4" on each side

of line, cut apart on line, and press to Dark Blue.

Next place (1) 3 7/8" DARK BLUE square on unit, draw diagonal line, and stitch a scant 1/4" on each side of line. 

Cut apart on line, and press to Dark Blue..   One 7 1/4" Light Blue square and four 3 7/8" Dark Blue squares will

yield 4 Flying Geese.

Your Flying Geese unit should measure 3 1/2 x 6 1/2"

Make 24