Courage Block     12 1/2" Unfinished
Fabrics & Cutting:     SCRAP IT UP!   

White:       (2)  5" squares, draw a diagonal line on wrong side
                 (2) 3" squares - draw diagonal line on wrong side
                 (8) 2 1/2" x 4 1/2"

BLUE:       (2)  5" squares
                  (8) 2 1/2" squares - draw diagonal line on wrong side

RED:         (2) 3" squares
                 (8) 2 1/2" squares - draw a diagonal line on wrong side
Sewing Instructions: 

Make Half Square Triangles (HST) by placing                         Make Half Square Triangles (HST) by placing
(1) 3" WHITE square on top of (1) 3" RED square,                  (1) 5" WHITE square on top of (1) BLUE square,
right sides together. Stitch 1/4" on each side of                       right sides together. Stitch 1/4" on each side of
line. Cut apart on line, and press to Red.                                   line. Cut apart on line, and press to Blue.
                       Square up to 2 1/2"                                                                   Square up to 4 1/2"     
Make 4
Make 4
Place (1) 2 1/2" RED square on one end of                              Repeat process on opposite end of 2 1/2" x 4 1/2"
(1) 2 1/2" x 4 1/2" WHITE strip, as shown. Sew                        strip, using (1) 2 1/2" BLUE square, being careful of
on line. Cut 1/4" seam allowance, and flip back                       placement:     
and press.
Make 4
Make 4  "A"
Assemble your quad unit as shown:
Make 4
Block Assembly: 

Assemble your block using (4) Quad units, rotating until as shown below:
Your block should measure 12 1/2" Unfinished
Here is what a finished quilt (62x62) might look like - using 16 blocks, with a 2"(unfinished) inner border, and a 5 1/2'' (unfinished) border:
Repeat above process, but reversing direction of sewn 2 1/2" square, as shown:
Make 4
Make 4  "B"
<---"A"
"B" --->